Click image to view full size image
Introduction
Temperature Control Manifolds are widely used in water systems to connect different pipe branches, water supply pipes, return pipes, etc. Different water systems will have different uses and configurations. If the water distributor is installed in the floor heating system, it is generally used to manage the flow of different branch pipes. If it is installed in the water supply system, it is to facilitate the installation and management of different branches. Our products have isolation valves and balance valves with flow meters, and they have been completely assembled and can be installed at any time.
Features
1. The Temperature Control Manifold provides a 2-8 loop configuration with a maximum flow of 15.4 GPM.
2. The valve body end adopts an R32 connector, and the annular outlet adopts R20 external thread.
3. This kit includes a fill and drain ball valve with a 1/2-inch connection, an automatic bleed valve, and a label.
4. This product uses brass as raw material, and has good waterproof and wear resistance.
Pressure and temperature:
88 psi at 140°F/60°C
73 psi at 158°/70°C
59 psi at 176°F/80°C
45 psi at 194°F/90°C
http://www.winsoems.com/